7 mins read
0 Comments

Dairy Instrumentation Engineer Job Description

Dairy Jobs, the specialist dairy job board

This Dairy Instrumentation Engineer job description sets out the main duties, qualifications, skills and measures of success for the role, which is also known as Instrument Engineer, Electrical and Instrumentation (E&I) Engineer, Instrument Technician or Controls and Instrumentation Engineer. Download it free as a Word or PDF template and adapt it for your own vacancy.

This template is a guide only. Adapt it to your vacancy and check it meets the employment law where the job is based before you use it. See our terms of use.

Job titleDairy Instrumentation Engineer
Also known asInstrument Engineer, Electrical and Instrumentation (E&I) Engineer, Instrument Technician, Controls and Instrumentation Engineer
DepartmentEngineering and maintenance
Reports toEngineering Manager (or Electrical and Automation Manager on larger sites)
Direct reportsNone

What does a Dairy Instrumentation Engineer do?

Calibrates, maintains and repairs the temperature, pressure, flow, level, pH, conductivity and turbidity instruments on pasteurisers, UHT plants, CIP sets, separators, evaporators, dryers and fillers. Keeps the instrument register and calibration records up to date, fault finds from sensor to PLC input, and makes sure critical instruments such as the pasteuriser holding tube temperature sensor and flow diversion valve are proven accurate and fully recorded for food safety audits.

Dairy Instrumentation Engineer duties and responsibilities

Calibration and maintenance

  • Calibrate temperature, pressure, flow, level, pH, conductivity and turbidity instruments on pasteurisers, UHT plants, CIP sets, separators, evaporators, dryers and fillers to the schedule
  • Use traceable reference standards, keep their certificates in date and store them so they stay accurate
  • Treat any reading outside its tolerance as a failed calibration: record the as-found reading, report it to the Engineering Manager and quality before you adjust or replace the instrument, and record the as-left reading once it is back in tolerance
  • Keep the instrument register and calibration schedule up to date in the maintenance system, including new, moved and removed instruments
  • Replace and commission transmitters, control valves and positioners, and prove them before handing back to production
  • Do planned maintenance on sensors, control valves and positioners and watch for drift between calibrations
  • Keep spares for critical instruments on site and tell the Engineering Manager when stock runs low

Pasteuriser and critical control points

  • Calibrate and check the pasteuriser holding tube temperature sensor, flow diversion valve and chart recorder or data logger, which monitor and control the pasteurisation critical control point, at the frequency set in the food safety plan
  • Test that the flow diversion valve diverts when the holding tube temperature drops below the set point and that the recorder shows the diversion
  • Compare the chart recorder or data logger against a reference thermometer and record the result
  • When a critical instrument fails calibration, tell quality straight away so that product made since the last good check can be reviewed before release
  • Keep calibration records for critical instruments complete and easy to find, as they are checked at food safety audits
  • Calibrate the pressure instruments that prove pasteurised product stays at higher pressure than raw product in the regeneration section
  • Check weighing and filling instruments on fillers and checkweighers, and support legal metrology verification as required where the job is based

Fault finding and control systems

  • Fault find instrument loops from the sensor, through the cabling and junction boxes, to the PLC input card, working with the Automation Engineer
  • Carry out loop checks on new and repaired instruments and record the results
  • Work in control panels and on field wiring under the permit to work and isolation system, proving dead before starting
  • Configure transmitters, positioners and smart devices and record the settings
  • Keep instrument drawings, loop diagrams, I/O lists and data sheets current after every change
  • Support shift engineers with instrument faults, including call-out cover where the site requires it

Hygienic design, projects and training

  • Fit instruments to hygienic standards: correct process connections and seals, no dead legs, and sensors placed where they read true and are cleaned by CIP
  • Check that instruments, seals and cable glands are rated for CIP temperatures and chemicals and for wet washdown
  • Specify instruments for projects and small works, and commission them with the project team
  • Train technicians and operators on instrument care, such as handling probes, cleaning sensors and reporting suspect readings
  • Review instrument faults and drift trends and suggest changes that cut repeat failures

Dairy Instrumentation Engineer qualifications and experience

Essential

  • Recognised electrical, instrumentation or control engineering qualification, such as an apprenticeship, HNC or equivalent
  • Experience calibrating and maintaining process instruments in a food, dairy or similar regulated plant
  • Working knowledge of 4-20 mA loops, transmitters, control valves and PLC inputs and outputs
  • Able to read and update loop diagrams, P&IDs and electrical drawings
  • Understanding of calibration records, traceability and what a failed calibration means for product
  • Electrical safety and permit to work training, as required where the job is based

Desirable

  • Experience with pasteurisers, UHT plants or CIP systems and their critical control instruments
  • Knowledge of hygienic design standards for instruments and fittings
  • Experience with HART or similar configuration tools and calibration management software
  • Experience with pH, conductivity and turbidity instruments used for CIP control and product and water interface detection
  • Hazardous area (CompEx or equivalent) certificate, as required where the job is based
  • Basic PLC fault finding skills, such as reading input and output status on the controller
  • Food hygiene certificate, as required where the job is based

Skills and attributes

  • Methodical and precise
  • Honest about results, including failed calibrations
  • Clear, accurate record keeping
  • Logical fault finding
  • Works safely around live panels and hot process
  • Explains instruments simply to operators and technicians
  • Plans work around production and CIP windows

How success is measured

  • Calibrations completed on schedule with no overdue critical instruments
  • Complete, traceable calibration records that pass food safety audits
  • Every failed calibration recorded, reported and followed up
  • Instrument-related downtime within the agreed target
  • Instrument register and loop diagrams up to date after every change
  • New and replaced instruments commissioned right first time
  • No accidents, injuries or electrical safety breaches

Working conditions and safety

Mainly day work on a production site, with call-out or shift cover for instrument faults where the site requires it. The work involves climbing to instruments on tanks, pipework and dryers, working in control panels that may contain live parts, under isolation, and working in hot, wet or noisy areas near moving machinery and CIP chemicals; PPE and training are provided.

  • Follow health and safety rules and safe systems of work, and wear the correct PPE
  • Follow food safety, hygiene, HACCP and quality procedures at all times
  • Report hazards, accidents, near misses and concerns promptly

Dairy Instrumentation Engineer interview questions

Use these questions to assess candidates for a Dairy Instrumentation Engineer role. Each one includes what a good answer shows.

  1. Which process instruments have you calibrated, and what reference standards did you use?
    What a good answer shows: Names real instruments such as temperature, pressure, flow and pH, and describes reference standards with in-date certificates that are traceable to a recognised standard.
  2. A pasteuriser holding tube temperature sensor reads just outside its tolerance at calibration. What do you do?
    What a good answer shows: Treats it as a failed calibration, however small the margin. Records the as-found reading, never adjusts it quietly, tells quality and the Engineering Manager so that product made since the last good check is reviewed before release, then repairs or replaces the sensor, recalibrates and records the action.
  3. Why are the pasteuriser flow diversion valve, holding tube temperature sensor and chart recorder treated differently from other instruments?
    What a good answer shows: Knows they monitor and record the pasteurisation critical control point, proving the product reached pasteurisation temperature for the hold time, and that their calibration records are checked at food safety audits.
  4. How do you check that a flow diversion valve is working?
    What a good answer shows: Tests that the valve diverts when the holding tube temperature drops below the set point, checks that the recorder or data logger shows the event, and records the result.
  5. Talk me through fault finding a transmitter that shows a frozen reading on the control screen.
    What a good answer shows: Works logically from the sensor to the PLC input: checks the process, the device, the loop current, the wiring and junction box, then the input card and scaling with the Automation Engineer, rather than swapping parts at random.
  6. How do you fit a temperature or pressure sensor into a hygienic process line?
    What a good answer shows: Uses hygienic process connections and the correct seals, avoids dead legs, places the sensor where it reads true and is cleaned by CIP, and checks the seal material suits the product and CIP chemicals.
  7. How do you isolate and prove dead before working in a control panel?
    What a good answer shows: Follows the permit to work and lock-out procedure, uses a proved voltage tester, locks off with a personal lock and never relies on someone else's word that it is safe.
  8. What goes in a good instrument register and calibration schedule?
    What a good answer shows: Tag number, location, range, tolerance, calibration frequency, reference standard used, last and next due dates, and a clear flag for instruments that monitor critical control points.
  9. You replace a flow transmitter on a CIP set. What do you do before handing it back?
    What a good answer shows: Configures the range and units, loop checks it to the PLC, compares the reading against a reference or a known plant flow, updates the loop diagram and register, and records the commissioning.
  10. How do you help operators look after instruments?
    What a good answer shows: Shows them how to clean probes, spot damaged cables and drifting readings, and report suspect readings rather than ignore them, and backs this up with simple written guidance.

Hiring a Dairy Instrumentation Engineer? Advertise your vacancy on Dairy Jobs and reach a growing network of approximately 300,000 dairy specialists worldwide, or ask our team about recruitment support. Looking for a Dairy Instrumentation Engineer job? Browse live dairy jobs or create a free job alert. New to the role? Read our guide: How to Become a Dairy Maintenance Engineer.

Related dairy job descriptions

Frequently asked questions

What does a Dairy Instrumentation Engineer do?

Calibrates, maintains and repairs the temperature, pressure, flow, level, pH, conductivity and turbidity instruments on pasteurisers, UHT plants, CIP sets, separators, evaporators, dryers and fillers. Keeps the instrument register and calibration records up to date, fault finds from sensor to PLC input, and makes sure critical instruments such as the pasteuriser holding tube temperature sensor and flow diversion valve are proven accurate and fully recorded for food safety audits.

What qualifications does a Dairy Instrumentation Engineer need?

Employers usually look for: a recognised electrical, instrumentation or control engineering qualification; experience calibrating and maintaining process instruments in a food, dairy or similar regulated plant; working knowledge of 4-20 mA loops, transmitters, control valves and PLC inputs and outputs.

Who does a Dairy Instrumentation Engineer report to?

A Dairy Instrumentation Engineer usually reports to the Engineering Manager, or to the Electrical and Automation Manager on larger sites.

Can I use this Dairy Instrumentation Engineer job description for my own vacancy?

Yes. Download the free Word template, add your location, contract and salary details, and adapt the duties to your site. You can then advertise the role on Dairy Jobs.

© 2026 Dairy Jobs (Specialist Recruiters Ltd). You may adapt this job description for your own vacancies. Please do not republish it.

Subscribe to newsletter

Subscribe to get the latest job updates.