This Dairy Evaporator Operator job description sets out the main duties, qualifications, skills and measures of success for the role, which is also known as Evap Operator, Concentration Plant Operator or Powder Plant Process Operator. Download it free as a Word or PDF template and adapt it for your own vacancy.
This template is a guide only. Adapt it to your vacancy and check it meets the employment law where the job is based before you use it. See our terms of use.
| Job title | Dairy Evaporator Operator |
| Also known as | Evap Operator, Concentration Plant Operator, Powder Plant Process Operator |
| Department | Dairy processing (milk powder and concentrate) |
| Reports to | Milk Powder Shift Supervisor |
| Direct reports | None |
What does a Dairy Evaporator Operator do?
Runs the falling-film evaporator that concentrates milk, skim milk or whey before it is spray dried or sent out as concentrate. Controls feed, heat treatment, vacuum, product temperatures and concentrate total solids, manages run length and cleaning, and keeps product safe and losses low.
Dairy Evaporator Operator duties and responsibilities
Running the evaporator
- Start up, run and shut down the multi-effect falling-film evaporator and its thermal (TVR) or mechanical (MVR) vapour recompression system using written procedures (SOPs)
- Control feed flow, preheating and heat treatment so the product is pasteurised before it enters the first effect
- Hold the vacuum so the product boils at low temperatures, roughly 40 to 70 °C across the effects, and is not damaged by heat
- Adjust the plant to hold concentrate total solids at the target the dryer needs, usually around 45 to 55 per cent for milk powder
- Send concentrate to the balance or feed tank at a controlled temperature, and cool and crystallise whey concentrate before drying where required
- Watch the control screens and trends and act quickly on alarms for vacuum loss, level, temperature and total solids
- Plan run lengths and changeovers with the dryer operator and the supervisor so product keeps moving
Product quality and records
- Check concentrate total solids by refractometer or density meter at set intervals and correct any drift
- Keep to the set run lengths and intermediate rinses so fouling, heat-loving bacteria (thermophiles) and spores do not build up
- Monitor condensate (cow water) by conductivity or COD before it is reused
- Measure product losses to drain at start-up, changeover and CIP and work to bring them down
- Record feed rates, temperatures, vacuum, total solids and run times accurately and at the time
- Record batch and traceability details for every run
- Hold any concentrate outside specification and tell the Milk Powder Shift Supervisor and quality straight away
Cleaning, hygiene and food safety
- Run cleaning in place (CIP) caustic and acid cycles and check that concentrations, temperatures and times meet the written programme
- Confirm the evaporator is clean and ready before each run
- Follow food safety rules on hand washing, clothing and hygiene zones
- Follow HACCP controls and report any failure at a critical control point
- Keep the evaporator floor and platforms clean, tidy and free of spills
Safety and teamwork
- Follow safe ways of working, lock-out rules and PPE rules at all times
- Follow the working at height rules on evaporator platforms
- Report accidents, near misses and unsafe conditions straight away
- Give and receive a clear handover at each shift change
- Report faults to maintenance and help with simple repairs where trained
- Suggest ideas to reduce losses, stoppages and unplanned cleaning
Dairy Evaporator Operator qualifications and experience
Essential
- Experience operating process plant in a dairy or food factory
- Ability to read control screens and trends and act on alarms
- Ability to follow written procedures exactly
- Basic understanding of total solids, temperature and flow
- Good number skills for total solids and yield calculations
- Willingness to work rotating shifts, including nights and weekends
Desirable
- Experience on evaporators, dryers or UHT plant
- Basic food hygiene certificate or similar
- Basic knowledge of HACCP (food safety controls)
- Understanding of how heat treatment and run length affect powder quality
- Experience of running CIP
- Forklift training as required where the job is based
Skills and attributes
- Attention to detail
- Staying calm under pressure
- Careful record keeping
- Clear communication at handover
- Practical problem solving
How success is measured
- Concentrate total solids within target
- Run lengths achieved without unplanned CIP
- Product losses within target
- Microbiological results within specification
- Complete and accurate records
- No accidents or injuries
Working conditions and safety
Shift work on a milk powder site, including nights and weekends. The evaporator floor is hot, humid and noisy. The work involves steam, hot surfaces, CIP chemicals and working at height on evaporator platforms; PPE and training are provided.
- Follow health and safety rules and safe systems of work, and wear the correct PPE
- Follow food safety, hygiene, HACCP and quality procedures at all times
- Report hazards, accidents, near misses and concerns promptly
Dairy Evaporator Operator interview questions
Use these questions to assess candidates for a Dairy Evaporator Operator role. Each one includes what a good answer shows.
- What does controlling concentrate total solids involve, and how would you correct a drift?
What a good answer shows: Checks total solids with a refractometer or density meter at set intervals, compares the reading with the dryer target, corrects with small changes to feed or heat input rather than big swings, and records both. - The evaporator loses vacuum during a run. What do you do?
What a good answer shows: Knows that boiling temperatures rise when vacuum is lost and product can be heat damaged. Follows the SOP to protect product and plant, looks for the cause and tells the supervisor. - Why is the run length on an evaporator limited?
What a good answer shows: Explains that fouling builds up on the heating surfaces and heat-loving bacteria and spores can grow during a long run, so rinses and cleans happen at set times and a run is never stretched to hit the plan. - How do you know a CIP has worked?
What a good answer shows: Checks caustic and acid concentrations, temperatures, flows and times against the programme, inspects or swabs where the procedure says to, and reports any step that missed its limit so the clean is repeated. - A concentrate result is outside the specification limit. What do you do?
What a good answer shows: Treats any result outside the limit as a failure, however small the margin. Puts the product on hold, tells the supervisor and quality, records the result and the action taken, and never releases, blends or re-tests to get a pass. - How would you reduce product losses at changeover?
What a good answer shows: Times the switch between product and water using conductivity or a sight glass, pushes product out before rinsing, and measures what goes to drain. - When you look at a trend on the control screen, what are you looking for?
What a good answer shows: Looks at the direction and speed of change rather than a single reading, compares linked values such as steam, product temperature, vacuum and total solids, and acts before a limit is reached. - How do you give a good handover to the next shift?
What a good answer shows: Shares plant status, run time, total solids, problems, checks due, CIP status and open faults clearly, both in person and in writing. - Why is lock-out important before working on evaporator equipment?
What a good answer shows: Understands it stops pumps and valves starting by accident, isolates steam and CIP chemicals as well as power, and follows it every time, even when busy. - Why do you monitor condensate quality, and what would a high reading mean?
What a good answer shows: Knows condensate is checked by conductivity or COD, that a high reading means product is carrying over into the vapour, often from foaming or a high level, and that it is not reused until the cause is fixed.
Hiring a Dairy Evaporator Operator? Advertise your vacancy on Dairy Jobs and reach a growing network of approximately 300,000 dairy specialists worldwide, or ask our team about recruitment support. Looking for a Dairy Evaporator Operator job? Browse live dairy jobs or create a free job alert. New to the role? Read our guide: How to Become a Dairy Process Operator.
Watch and learn
See the evaporator in action in these training animations from the Watson Dairy Consulting YouTube channel.
Related dairy job descriptions
- Milk Powder Process Manager
- Milk Powder Shift Supervisor
- Milk Powder Dryer Operator
- Dairy Process Operator
- Dairy CIP Operator
- All dairy job descriptions
Frequently asked questions
Runs the falling-film evaporator that concentrates milk, skim milk or whey before it is spray dried or sent out as concentrate. Controls feed, heat treatment, vacuum, product temperatures and concentrate total solids, manages run length and cleaning, and keeps product safe and losses low.
Employers usually look for: experience operating process plant in a dairy or food factory; the ability to read control screens and trends and act on alarms; the ability to follow written procedures exactly.
A Dairy Evaporator Operator usually reports to the Milk Powder Shift Supervisor.
Yes. Download the free Word template, add your location, contract and salary details, and adapt the duties to your site. You can then advertise the role on Dairy Jobs.
© 2026 Dairy Jobs (Specialist Recruiters Ltd). You may adapt this job description for your own vacancies. Please do not republish it.
