This Dairy NPD Technologist job description sets out the main duties, qualifications, skills and measures of success for the role, which is also known as New Product Development Technologist, Product Development Technologist, Development Technologist or Innovation Technologist. Download it free as a Word or PDF template and adapt it for your own vacancy.
This template is a guide only. Adapt it to your vacancy and check it meets the employment law where the job is based before you use it. See our terms of use.
| Job title | Dairy NPD Technologist |
| Also known as | New Product Development Technologist, Product Development Technologist, Development Technologist, Innovation Technologist |
| Department | Technical and product development |
| Reports to | NPD Manager (or Technical Manager on sites without one) |
| Direct reports | None |
What does a Dairy NPD Technologist do?
Turns a customer or marketing brief into a new or improved dairy product, such as milk, cream, yogurt, cheese, a dessert, a powder or a drink. NPD stands for new product development. Works up recipes on the bench and pilot plant, runs factory trials with production, agrees the specification and shelf life with quality and the laboratory, and hands the finished product over to production with a written process.
Dairy NPD Technologist duties and responsibilities
Briefs and recipe development
- Take a customer or marketing brief and agree what the product must taste like, look like, cost and claim before work starts
- Develop recipes on the bench for milk, cream, yogurt, cheese, desserts, powders or drinks, recording every trial
- Choose ingredients, cultures and packaging with procurement, checking each against the brief and the approved supplier list
- Make samples on the pilot plant to see how the recipe behaves at larger scale
- Run sensory panels, record the results and prepare samples for customer presentations
- Keep trial records clear enough that any sample can be made again the same way
- Work on recipe changes and cost reductions to existing products as well as new launches
Factory trials and scale-up
- Plan factory trials with production, agreeing the line, time, raw materials and what happens to the trial product
- Be on the line during trials, taking samples and recording process settings at each stage
- Compare trial product with the bench sample and adjust the recipe or process where needed
- Write the process so operators can follow it: settings, hold times, in-process checks and limits
- Agree in-process limits with quality; any result outside a limit is a failure and the product is held
- Hand the product over to production with the written process, training and a first-production check
- Support the first production runs and sort out problems quickly with the production and quality teams
Specifications, labels and shelf life
- Write finished product and raw material specifications with the quality team
- Build allergen and nutrition data for each product from the recipe and supplier information
- Prepare label copy and claims with the regulatory or quality team so every statement can be backed up
- Set up shelf-life studies with the laboratory and review microbiological, chemical and sensory results against the agreed limits
- Treat any shelf-life result outside a limit as a failure, hold the project at that point and find the cause
- Keep specifications up to date when a recipe, supplier or process changes
- Raise a HACCP review for any new ingredient, process step or packaging
Costings, projects and launch
- Build product costings with finance and procurement and check the margin against the brief at each gate
- Keep each project on the tracker with dates, actions, risks and owners
- Present projects at gate reviews with trial results, costings and open issues
- Send customer samples on time with the right paperwork and specification
- Check first-production product, packaging and labels against the specification at launch
- Review each launch afterwards and write up what to repeat and what to change
- Keep up to date with new ingredients, processes and products in the market that could help future projects
Dairy NPD Technologist qualifications and experience
Essential
- Degree, HND or equivalent in food science, dairy technology or a related subject, or equivalent experience in dairy product development
- Experience developing dairy products on the bench and taking them through factory trials
- Working knowledge of dairy processing such as pasteurisation, separation, fermentation, cheese making or drying, as relevant to the site
- Understanding of HACCP and food safety as they apply to a new product or process
- Confident with spreadsheets for recipes, costings and nutrition calculations
- Clear, accurate writing for specifications, process documents and reports
Desirable
- Food hygiene certificate at the level the site requires
- HACCP certificate, as required where the job is based
- Knowledge of food labelling and nutrition claim rules, as required where the job is based
- Experience with sensory panel methods and sample preparation
- Experience designing shelf-life studies and reading microbiological results
- Experience with product costing and margin calculations
- Knowledge of cultures, stabilisers, sweeteners and other functional ingredients used in dairy products
- Experience working to retailer or customer technical standards and specification systems
Skills and attributes
- Curiosity and a practical, hands-on approach
- Attention to detail in recipes, records and specifications
- Clear communication with production, quality, sales and customers
- Organised, able to run several projects at once
- Keeps going when a trial fails and learns from it
- Good palate and willingness to taste product often
- Honest about results, even when they are not what the project wants
How success is measured
- Projects delivered to the agreed launch date
- Launched products meet the brief, the specification and the agreed margin
- First production runs meet the specification without rework
- Complete and accurate trial records, specifications and process documents
- Shelf-life studies finished before launch with every failed result investigated and closed
- Customer samples sent on time and accepted
- No food safety or labelling problems from new products after launch
Working conditions and safety
Mainly daytime hours, split between the development kitchen or pilot plant, the laboratory, an office and the factory floor during trials. Trials may run early, late or at weekends to fit the production plan, and factory work involves standing for long periods in warm, wet or noisy areas near moving machinery; PPE and training are provided. Some travel to customers, suppliers and other sites may be needed.
- Follow health and safety rules and safe systems of work, and wear the correct PPE
- Follow food safety, hygiene, HACCP and quality procedures at all times
- Report hazards, accidents, near misses and concerns promptly
Dairy NPD Technologist interview questions
Use these questions to assess candidates for a Dairy NPD Technologist role. Each one includes what a good answer shows.
- Tell us about a dairy product you took from brief to launch. What was your part in it?
What a good answer shows: Describes a real product, the brief, the bench and trial work they did themselves, and what changed between the first sample and the launched product. - A marketing brief asks for a high-protein yogurt with a clean label and a set cost. Where do you start?
What a good answer shows: Pins down what the brief really needs, checks what the site can make, looks at protein sources and cultures, costs the options early and talks to production and quality before the first bench trial. - How do you keep bench trial records?
What a good answer shows: Records every ingredient, weight, process step and result at the time, so any sample can be made again and the final recipe can be traced back to its trials. - A product that worked on the bench behaved differently in the factory trial. What do you do?
What a good answer shows: Looks at what changed at scale, such as heat treatment, shear, hold times or raw material, works through it with the operators and adjusts the recipe or process rather than blaming the plant. - A shelf-life sample fails one microbiological limit by a small margin on the final day. What do you do?
What a good answer shows: Treats any result outside the limit as a failure, however small the margin. Does not launch at that shelf life: tells the NPD Manager and quality, investigates the cause, and either fixes it and repeats the study or sets a shorter shelf life with a safety margin. Never re-tests to get a pass or pushes the launch through. - How do you build the nutrition and allergen data for a new product?
What a good answer shows: Works from the recipe and supplier specifications, calculates by weight, checks against a laboratory analysis where needed and captures every allergen in every ingredient, including cross-contact risks from the line. - How do you check that a label claim can be made?
What a good answer shows: Checks the claim against the rules where the product is sold, has the data to back it up and gets the regulatory or quality team to approve the wording before artwork goes ahead. - A trial product costs more than the brief allows. What are your options?
What a good answer shows: Looks at ingredients, yield, pack size, process time and waste, works with procurement and finance on real numbers and goes back to the customer or marketing with clear choices instead of quietly cutting quality. - How do you hand a new product over to production?
What a good answer shows: Writes a process the operators can follow, with settings, in-process checks and limits, trains the team, is there for the first production run and does not sign off until the product meets the specification. - Tell us about a project that was stopped or failed. What did you learn?
What a good answer shows: Is honest about what went wrong, whether it was the brief, the recipe or the cost, and shows how they changed their approach on the next project.
Hiring a Dairy NPD Technologist? Advertise your vacancy on Dairy Jobs and reach a growing network of approximately 300,000 dairy specialists worldwide, or ask our team about recruitment support. Looking for a Dairy NPD Technologist job? Browse live dairy jobs or create a free job alert. New to the role? Read our guide: How to Become a Dairy Technologist.
Related dairy job descriptions
- Dairy Technologist
- Dairy Technical Manager
- Dairy Quality Assurance Manager
- Cheesemaker
- Yogurt Maker
- All dairy job descriptions
Frequently asked questions
Turns a customer or marketing brief into a new or improved dairy product, such as milk, cream, yogurt, cheese, a dessert, a powder or a drink. NPD stands for new product development. Works up recipes on the bench and pilot plant, runs factory trials with production, agrees the specification and shelf life with quality and the laboratory, and hands the finished product over to production with a written process.
Employers usually look for: a degree, HND or equivalent in food science, dairy technology or a related subject, or equivalent experience in dairy product development; experience developing dairy products on the bench and taking them through factory trials; working knowledge of dairy processing such as pasteurisation, separation, fermentation, cheese making or drying.
A Dairy NPD Technologist usually reports to the NPD Manager, or to the Technical Manager on sites without one.
Yes. Download the free Word template, add your location, contract and salary details, and adapt the duties to your site. You can then advertise the role on Dairy Jobs.
© 2026 Dairy Jobs (Specialist Recruiters Ltd). You may adapt this job description for your own vacancies. Please do not republish it.
