6 mins read
0 Comments

Dairy Packaging Technologist Job Description

Dairy Jobs, the specialist dairy job board

This Dairy Packaging Technologist job description sets out the main duties, qualifications, skills and measures of success for the role, which is also known as Packaging Development Technologist, Packaging Specialist or Packaging Engineer. Download it free as a Word or PDF template and adapt it for your own vacancy.

This template is a guide only. Adapt it to your vacancy and check it meets the employment law where the job is based before you use it. See our terms of use.

Job titleDairy Packaging Technologist
Also known asPackaging Development Technologist, Packaging Specialist, Packaging Engineer
DepartmentTechnical and product development
Reports toTechnical Manager (or NPD Manager on sites that have one)
Direct reportsNone

What does a Dairy Packaging Technologist do?

Owns the packaging specifications for a dairy site, covering bottles, cartons, pots, pouches, films, cases and labels. Chooses materials that protect shelf life, checks they are safe for food contact, runs line trials with production and engineering when a pack or supplier changes, and solves pack faults on the filling and packing lines.

Dairy Packaging Technologist duties and responsibilities

Packaging specifications

  • Write and keep up to date the specification for every bottle, carton, pot, pouch, film, case and label used on site
  • Set the key measurements, material grade, barrier and seal requirements and the limits for each item
  • Hold a signed-off specification from the supplier for every item before first use
  • Write pack and pallet specifications for customers, including case count, pallet pattern and stacking height
  • Keep the specification system current so production, purchasing and quality all work from the same version
  • Review specifications when a product, pack size or filling line changes

Materials, shelf life and compliance

  • Choose packaging materials that protect the product from light, oxygen and moisture for its full shelf life
  • Work with the Dairy Technologist and quality team on shelf-life trials when a pack or material changes
  • Check that every food-contact material has a valid supplier declaration of compliance and keep it on file
  • Check artwork and labels with the regulatory or quality team before they are approved for print
  • Confirm that packaging is fit for the process it goes through, such as hot fill, UHT or freezing
  • Keep test and trial records so that any pack can be traced back to its material batch and supplier

Line trials, suppliers and pack faults

  • Plan and run line trials with production and engineering when a pack, material or supplier changes, and write up the results
  • Approve new packaging suppliers and items, with samples, trial results and documents checked before first use
  • Investigate pack faults on filling and packing lines, such as leaking seals, poor opening, print defects or weak cases, and find the root cause
  • Raise and follow up complaints with suppliers until the fault is fixed and the fix is proven on the line
  • Hold back any packaging that fails an incoming check or a line trial, and record the result and the action taken
  • Give practical advice to line operators and engineers when a new pack is introduced

Cost, waste and improvement projects

  • Lead projects to cut packaging cost, for example lighter materials, thinner films or a better case design, without harming product protection
  • Measure packaging waste on the lines and work with production to reduce it
  • Lead recyclability projects, such as moving to mono-materials or recycled content, and check they run on the existing lines
  • Review new packaging ideas from suppliers and bring forward the ones that fit the site
  • Support new product development with packaging options, costs and lead times
  • Report project progress, savings and risks to the Technical Manager

Dairy Packaging Technologist qualifications and experience

Essential

  • Degree, HND or equivalent in packaging technology, food science, materials science or a related subject, or equivalent experience
  • Experience in a packaging or technical role in a food or drink factory
  • Working knowledge of packaging materials and how they behave on filling and packing lines
  • Ability to write clear specifications and trial reports
  • Good computer skills, including spreadsheets and a specification or document control system
  • Able to work on the factory floor during line trials, including occasional early starts, late finishes or night shifts

Desirable

  • Professional packaging qualification, for example a diploma in packaging technology
  • Experience with dairy packaging formats, for example HDPE bottles, gable-top or aseptic cartons, thermoformed pots, flexible films and shrink wrap
  • Knowledge of food-contact material requirements and supplier declarations of compliance, as required where the job is based
  • Experience of shelf-life trials and barrier testing
  • Knowledge of HACCP and a food safety standard such as BRCGS, FSSC 22000 or similar, as required where the job is based
  • Experience running line trials and working with engineering on machine settings
  • Knowledge of artwork approval and label content checks
  • Experience of recyclability or packaging reduction projects

Skills and attributes

  • Attention to detail
  • Clear, practical writing for specifications and reports
  • Methodical problem solving on pack faults
  • Good working relationships with suppliers, production and engineering
  • Organised, able to run several projects at once
  • Numerate, comfortable with costs, measurements and trial data
  • Hands-on approach on the factory floor

How success is measured

  • Every packaging item in use has a current, signed-off specification
  • Supplier declarations of compliance in place for all food-contact materials
  • Line trials completed on time with results written up and agreed with production
  • Pack-related complaints from customers and consumers reduced
  • Packaging faults and line stoppages caused by packaging reduced
  • Cost, waste and recyclability projects delivered to plan
  • No artwork or label errors reaching print

Working conditions and safety

Mainly day-based, split between an office and the factory floor, with time on filling and packing lines during trials and fault investigations, which may mean early starts, late finishes or occasional night shifts. Some travel to suppliers and customers. Factory areas can be noisy, cold or wet, with moving machinery; PPE and training are provided.

  • Follow health and safety rules and safe systems of work, and wear the correct PPE
  • Follow food safety, hygiene, HACCP and quality procedures at all times
  • Report hazards, accidents, near misses and concerns promptly

Dairy Packaging Technologist interview questions

Use these questions to assess candidates for a Dairy Packaging Technologist role. Each one includes what a good answer shows.

  1. Which dairy packaging formats have you worked with, and what did you do with them?
    What a good answer shows: Names real formats such as bottles, cartons, pots, films or cases, and describes specifications, trials or fault work they did themselves.
  2. What goes into a good packaging specification?
    What a good answer shows: Lists material, dimensions, weight, barrier and seal requirements, print and label details, the limits for each, and who signs it off; mentions keeping one current version that everyone works from.
  3. A new lidding film is being considered for yogurt pots. How would you check it will protect shelf life?
    What a good answer shows: Thinks about light, oxygen and moisture barrier, seal strength to the pot, and a shelf-life trial against the current film before any change is made.
  4. How do you make sure a packaging material is safe for food contact?
    What a good answer shows: Asks the supplier for a declaration of compliance and migration data for the intended use, checks it covers the product type, temperature and shelf life, and keeps it on file.
  5. Talk me through how you would run a line trial for a new bottle supplier.
    What a good answer shows: Plans the trial with production and engineering, agrees what will be measured, watches the line, records faults and speeds, holds the product until results are reviewed, and writes it up.
  6. A seal-strength result on a line trial is outside the limit. What do you do?
    What a good answer shows: Treats any result outside the limit as a failure, however small the margin. Stops the trial or holds the product, tells production and quality, records the result and the action taken, and never widens the limit or re-tests to get a pass.
  7. Cartons are leaking at the top seal on one filling line. How do you find the cause?
    What a good answer shows: Works methodically through material, machine and method: checks the carton batch against the specification, sealing temperature, pressure and time, machine condition, and asks operators what changed; proves the fix before closing it.
  8. How do you check artwork before it goes to print?
    What a good answer shows: Uses a checklist with the regulatory or quality team covering ingredients, allergens, dates, weights, barcodes and claims, checks against the approved product specification, and gets a signed approval.
  9. Tell me about a project where you cut packaging cost or waste.
    What a good answer shows: Gives a real example with the saving, how product protection and line performance were protected, and how production and the supplier were involved.
  10. How do you handle a supplier whose packaging keeps causing faults?
    What a good answer shows: Raises formal complaints with evidence, agrees corrective actions and deadlines, checks the fix on the line, and escalates to purchasing and the Technical Manager if the problem continues.

Hiring a Dairy Packaging Technologist? Advertise your vacancy on Dairy Jobs and reach a growing network of approximately 300,000 dairy specialists worldwide, or ask our team about recruitment support. Looking for a Dairy Packaging Technologist job? Browse live dairy jobs or create a free job alert. New to the role? Read our guide: How to Become a Dairy Technologist.

Related dairy job descriptions

Frequently asked questions

What does a Dairy Packaging Technologist do?

Owns the packaging specifications for a dairy site, covering bottles, cartons, pots, pouches, films, cases and labels. Chooses materials that protect shelf life, checks they are safe for food contact, runs line trials with production and engineering when a pack or supplier changes, and solves pack faults on the filling and packing lines.

What qualifications does a Dairy Packaging Technologist need?

Employers usually look for: a degree, HND or equivalent in packaging technology, food science, materials science or a related subject, or equivalent experience; experience in a packaging or technical role in a food or drink factory; working knowledge of packaging materials and how they behave on filling and packing lines.

Who does a Dairy Packaging Technologist report to?

A Dairy Packaging Technologist usually reports to the Technical Manager, or to the NPD Manager on sites that have one.

Can I use this Dairy Packaging Technologist job description for my own vacancy?

Yes. Download the free Word template, add your location, contract and salary details, and adapt the duties to your site. You can then advertise the role on Dairy Jobs.

© 2026 Dairy Jobs (Specialist Recruiters Ltd). You may adapt this job description for your own vacancies. Please do not republish it.

Subscribe to newsletter

Subscribe to get the latest job updates.