This Dairy Wastewater Treatment Operator job description sets out the main duties, qualifications, skills and measures of success for the role, which is also known as Effluent Plant Operator, Effluent Treatment Operator, Wastewater Technician or Environmental Plant Operator. Download it free as a Word or PDF template and adapt it for your own vacancy.
This template is a guide only. Adapt it to your vacancy and check it meets the employment law where the job is based before you use it. See our terms of use.
| Job title | Dairy Wastewater Treatment Operator |
| Also known as | Effluent Plant Operator, Effluent Treatment Operator, Wastewater Technician, Environmental Plant Operator |
| Department | Site services and environment |
| Reports to | Utilities Engineer or Engineering Manager (Environmental Manager on some sites) |
| Direct reports | None |
What does a Dairy Wastewater Treatment Operator do?
Runs the effluent treatment plant that cleans the factory wastewater before it is discharged to the sewer or a watercourse under the site consent. Keeps the plant within its limits, samples and tests the water, doses chemicals, handles sludge and keeps the records that prove compliance.
Dairy Wastewater Treatment Operator duties and responsibilities
Running the treatment plant
- Start up, run and shut down the effluent plant to written procedures, and act quickly on alarms
- Use the balance tanks to even out swings in flow and strength from production and CIP
- Correct pH by dosing acid or alkali so the DAF and the biological stage work properly
- Run the dissolved air flotation (DAF) unit, adjusting coagulant and flocculant dose to remove fat and suspended solids
- Keep the biological stage healthy by controlling aeration and dissolved oxygen in an activated sludge plant, or feed rate and temperature in an anaerobic digester
- Run the final clarifier and any filters or membranes so the discharge meets the consent
Sampling, testing and compliance
- Take samples at the set points and times, from inlet to final discharge
- Test pH, temperature, dissolved oxygen and suspended solids on site, and send samples to the laboratory for COD, BOD, fats, oils and grease, ammonia and nutrients where the consent requires
- Record every result at the time and compare it with the consent limits and plant targets
- Treat any result outside a consent limit as a breach, however small, and report it or any risk of a breach at once as the consent requires
- Link with production and CIP so chemical dumps and product losses do not shock the plant
- Help with sampling visits and inspections by the water company or environmental regulator
Chemicals, sludge and maintenance
- Receive, store and handle caustic, acid, coagulants and polymers safely, following data sheets and site rules
- Make up polymer and check dosing pumps so chemical use stays on target
- Thicken and dewater sludge and arrange collection or spreading to land as required where the job is based
- Do daily checks on pumps, blowers, mixers and dosing equipment, and report faults to maintenance
- Do simple maintenance such as cleaning probes, calibrating meters and clearing screens
Records, safety and teamwork
- Keep plant logs, consent returns and sludge records complete, accurate and ready for inspection
- Follow safe systems of work, lock-out rules and permits for confined spaces, working at height and gas risk areas
- Test the air for hydrogen sulphide, methane and oxygen before entering tanks or pits, and never enter a confined space without a permit
- Report accidents, near misses, spills and odour complaints straight away
- Give and receive a clear handover at each shift change and when on call
Dairy Wastewater Treatment Operator qualifications and experience
Essential
- Experience running a process or treatment plant, in a dairy, food factory, water company or similar
- Able to do simple tests such as pH, dissolved oxygen and suspended solids, and record them accurately
- Ability to follow written procedures exactly
- Comfortable handling chemicals and working outdoors in all weathers
- Willingness to work a rota including weekends and on-call
- Good number skills for dosing and flow calculations
Desirable
- Water or wastewater treatment qualification or industry certificate
- Confined space, working at height and chemical handling training
- Forklift or telehandler training as required where the job is based
- Experience of DAF or biological treatment plants
- Environmental awareness training
- Basic maintenance skills on pumps and dosing equipment
Skills and attributes
- Attention to detail
- Honesty with results
- Practical problem solving
- Staying calm under pressure
- Clear communication with production and the regulator contact
- Reliability on a 24-hour plant
How success is measured
- Discharge within consent limits every day
- Samples taken and tested to schedule
- Chemical use and sludge costs within budget
- No environmental incidents or complaints
- Plant maintenance done to schedule
- Records complete and ready for inspection
Working conditions and safety
Mostly outdoors and in plant rooms in all weathers, on a rota that includes weekends and on-call. The work involves odours, chemicals, biogas or hydrogen sulphide, confined spaces, working at height and slippery surfaces; PPE and training are provided.
- Follow health and safety rules and safe systems of work, and wear the correct PPE
- Follow permit rules for confined spaces, working at height and gas risk areas
- Report hazards, accidents, near misses, spills and concerns promptly
Dairy Wastewater Treatment Operator interview questions
Use these questions to assess candidates for a Dairy Wastewater Treatment Operator role. Each one includes what a good answer shows.
- The inlet pH drops suddenly after a CIP dump. What do you do?
What a good answer shows: Checks the reading is real, holds the water in the balance tank, adjusts alkali dosing to protect the biological stage, and tells production and the supervisor. - A final effluent result comes back over the consent limit. What do you do?
What a good answer shows: Treats it as a breach, however small. Holds or diverts the discharge where the site allows, tells the supervisor, makes sure it is reported to the water company or regulator as the consent requires, records it, and never adjusts the sample or re-tests to get a pass. - The DAF is producing a poor float. What would you check?
What a good answer shows: Checks coagulant and flocculant dose, pH, air and recycle flow, inlet fat load and the skimmer, and changes one thing at a time. - Dissolved oxygen in the aeration tank is falling. What do you do?
What a good answer shows: Thinks of a high organic load, a blower or diffuser fault or a toxic shock, checks the inlet and blowers, raises aeration and warns the supervisor. - How do you handle a chemical delivery?
What a good answer shows: Checks the paperwork against the right tank, confirms there is room, wears the right PPE, stays with the driver, and knows the spill procedure. - A balance tank is filling fast during a product loss. What do you do?
What a good answer shows: Tells production to stop or divert the loss, uses any spare storage, slows the forward feed, watches pH and load, and never lets untreated water bypass the plant. - Talk me through entering a confined space.
What a good answer shows: Asks whether entry is needed at all, gets a permit, tests the air for hydrogen sulphide, methane and oxygen, has a rescue plan and never enters alone. - How do you manage sludge on the plant?
What a good answer shows: Keeps wasting rates steady, dewaters to target dryness, keeps the press clean, and keeps the collection and land-spreading records required where the job is based. - How do you keep records ready for an inspection?
What a good answer shows: Writes results at the time, keeps calibration records and consent returns together, never leaves gaps or fills in later, and can show what was done after a bad result. - How would you reduce chemical use without risking the consent?
What a good answer shows: Compares dosing with the actual load, trims it step by step while watching results, and works with production to cut losses at source.
Hiring a Dairy Wastewater Treatment Operator? Advertise your vacancy on Dairy Jobs and reach a growing network of approximately 300,000 dairy specialists worldwide, or ask our team about recruitment support. Looking for a Dairy Wastewater Treatment Operator job? Browse live dairy jobs or create a free job alert. New to the role? Read our guide: How to Become a Dairy Process Operator.
Related dairy job descriptions
- Dairy CIP Operator
- Dairy Process Operator
- Dairy Hygiene Operative
- Dairy Health, Safety and Environment (HSE) Manager
- Dairy Engineering Manager
- All dairy job descriptions
Frequently asked questions
Runs the effluent treatment plant that cleans the factory wastewater before it is discharged to the sewer or a watercourse under the site consent. Keeps the plant within its limits, samples and tests the water, doses chemicals, handles sludge and keeps the records that prove compliance.
Employers usually look for: experience running a process or treatment plant in a dairy, food factory, water company or similar; the ability to do simple tests such as pH, dissolved oxygen and suspended solids and record them accurately; the ability to follow written procedures exactly.
A Dairy Wastewater Treatment Operator usually reports to the Utilities Engineer or Engineering Manager, or the Environmental Manager on some sites.
Yes. Download the free Word template, add your location, contract and salary details, and adapt the duties to your site. You can then advertise the role on Dairy Jobs.
© 2026 Dairy Jobs (Specialist Recruiters Ltd). You may adapt this job description for your own vacancies. Please do not republish it.
